Band Saw Blades

M42-Star
All purpose blade for small solid steel.
Engineered for:
Non ferrous metals
Contour cutting operations
Superior because:
Tooth tips of HSS M42
The standard tooth with 0 degrees respectively, slightly positive rake angle combined with a standard raker or wavy set is distinguished to cut short chipping materials and light wall thicknesses for smooth and burr-free cuts.

M42-Star Plus
The band for larger solid bars. 
Engineered for:
Non ferrous metals
Superior because:
Tooth tips of HSS M42
The hook tooth with a positive rake angle combined with a raker-set, for easy tooth penetration and chip formation on larger cross sections. Cuts long chipping and tough materials without a problem.  The STAR-PLUS Bi-metal band cuts smooth and accurate.

M42-Sprint 
The Structural-Professional
For light and medium wall thicknesses
Engineered for:
Medium to low alloy steels
Non ferrous structurals,Single and bundle cuts
Tubes and structurals with light or medium walls
Sheet metal on vertical band saw machines
Superior because:
Tooth tips of HSS M42
The variable tooth with 0 degree rake angle with a special group-set cuts even lightest sections with less vibration.
Short chipping materials are cut without a problem.
The M42-SPRINT Bi-Metal band for long life and low cost cutting.

M42-Sprint Plus 
Strong in workpieces of medium to large
dimensions.
Engineered for:
Non ferrous metals
Single and bundle cuts
Solid material of medium to large dimensions
Heavy wall tubes
Superior because:
Tooth tips made of HSS M42
The variable tooth with a positive rake angle with a special group-set cuts solid materials as well as heavy wall structurals and tubing at fast cutting rates, with a smooth surface.

M42-Maxima Sprint 
Outstanding in tough alloys and difficult materials.
Engineered for:
Long chipping steels
Stainless steels
Titanium base alloys
Special bronze
Copper alloys
Nickel base alloys 
Exotic, difficult to cut alloys
Solid material of medium sections
Superior because:
Tooth tips made of HSS M42
The special designed variable tooth with an extremely positive rake angle cuts aggressively in tough materials.
Reduced cutting forces and easy chip formation allow accurate cuts and long life.

M42-Profiler Sprint 
Outstanding performance for heavy fabricators
Engineered for:
Medium to large H-beams
Angles and similar shapes
Superior because:
Tooth tips made of HSS M42
The variable tooth with slightly positive rake angle and extra heavy group-set shows excellent performance on H-beams and similar shapes. The PROFILER-SPRINT avoids blade pinching in beams with inside tension, or in poorly supported profiles. For 90 degrees and miter cutting.

M42-Alucut Plus 
Easy cuts in light Metals.
Engineered for:
Pure aluminum and aluminum alloys
All dimensions
Superior because:
Tooth tips made of HSS M42
The positive hook tooth with an extra heavy set performs at all dimensions. Smooth cuts and long tool life.

M42-Alucut Sprint 
Pinch-Free through Aluminum.
Engineered for:
Pure aluminum and aluminum alloys
Materials that tend to pinch
Larger sections and heavy wall structurals
Superior because:
Tooth tips made of HSS M42
This heavy set tooth with positive rake angle avoids blade pinching and cuts larger workpieces with low vibration. ALUCUT-SPRINT for increased productivity and low cost per cut.

M42-Taifun Plus & Sprint 
Cuts excellent in special-alloys and materials of difficult machinability.
Engineered for:
Stainless steels
Heat resistant steels
Titanium alloys
Nickel based alloys

Taifun Plus Superior because:
Precision borazon-ground tooth tips made of HSS M42
The hook tooth with ground triple chip geometry, positive rake angle and standard-raker-set for perfectly divided chips. Beveled roughing teeth provide excellent guidance of saw blade: Sharpest cutting edges grant fast cutting rates and great cutting accuracy.

Taifun Sprint Superior because:
Precision borazon-ground tooth tips made of HSS M42

M51-Sprint Plus 
Extra wear resistant teeth for hard steels and alloys of medium dimension.
Engineered for:
Austenitic stainless steels
Titanium and special bronzes
Solid material of medium dimension, heavy wall tubing
Superior because:
Tooth tips made of HSS M51
The positive variable tooth with special strong tooth forms. High heat and wear resistance of HSS M51 tooth tips. Increased band life on all hard and problematic steels.

Blizzard Sprint  
Strong in large cross sections and demanding alloys with "ground" teeth
Engineered for:
Cutting solid ferrous and non ferrous materials of medium to large diameters.
Blizzard Sprint Superior because:
Fully wet ground tooth profile at over 120bar with a hardness of 68-69 RC.
These newly designed tooth forms are quiet and smooth cutting resulting in blade life not possible before with bimetal bandsaw blades.

The sawing technology you have been waiting for is beginning today!